neo train model

"Three elements... Firmness, commodity, delight."

Marcus Vitruvius was a legendary first century Roman author, architect and army engineer who wrote the Ten Books of Architecture ... I read the first one ... In it, he emphasized that any built structure required 'firmitas, utilitas and venustas' for it to be considered a legitimate architectural work. The popular Anglican translation is 'firmness, commodity and delight' which further translated means that any project must have strength; must be useful; and must be beautiful. Seems like pretty straightforward stuff, but not always followed.

I have approached all of my layout design and construction with this in mind, and the lower level backdrop was no exception. My plan called for (3) 4' x 8' sheets of .040 styrene to be cut into (12) 12" x 96" lengths which would be enough for the entire run. I wanted a system that would be stable, adaptable and attractive... pretty much those same three elements that the V man would have mandated had he been playing with trains instead of building aqueducts.

Plastic end caps were screwed into place along the entire run of the lower deck to accept the styrene backdrop in the same fashion as was done at the former doorway and peninsula.

The channels bend gracefully in corners allowing the styrene backdrop to follow easily. A Velcro square will be used on each riser to hold the top portion in place while providing for emergency access to the chase behind the lower backdrop... you know,  just in case.

The end caps were jointed to correspond with that of the bench work to maintain the sectional feature of the entire construction... again,  just in case.

Styrene sections were butted together and reinforced with a 3" wide backer that was stapled in place. A Velcro square is visible at the top.

Despite the channel, Velcro and styrene backing, the butted ends of the styrene did not sit uniformly, leaving a very visible seam in some locations.

Double-sided carpet tape was mounted on a 2" wide piece of styrene and slipped into place behind the butted sections and in front of the backer to provide a clean seam and a solid, but reversible bond.

The carpet tape did the trick nicely and the seams were barely noticeable at this point. The installed sheets of styrene were now ready to be carefully primed and painted, in place, with a 3" roller.

The installation of the backdrop more clearly illustrates the varying depths of each deck around the full run of the layout.

Although in different planes, the lower backdrop blends effortlessly with that of the upper which is mostly the room's sheet rocked walls.

Two decks, check. Two backdrops, check. And all the bells and whistles still to come!